Products
Simple application best exterior house washable emulsion paint
Exterior emulsion paint
Front
Reverse
Technical Parameters
| Primer | Exterior Emulsion Top Coating | |
| Property | Solvent free ( Water based ) | Solvent free ( Water based ) |
| Dry film thickness | 50μm-80μm/layer | 150μm-200μm/layer |
| Theoretical coverage | 0.15 kg/㎡ | 0.30 kg/㎡ |
| Touch dry | ＜2h（25℃） | ＜6h（25℃） |
| Drying time (hard) | 24hours | 24hours |
| Volume solids % | 70 | 85 |
| Application restrictions Min. Temp. Max. RH% |
(-10) ~ (80) | (-10) ~ (80) |
| State in the container | After stirring, there is no caking, showing a uniform state | After stirring, there is no caking, showing a uniform state |
| Constructability | No difficulty in spraying | No difficulty in spraying |
| Nozzle orifice (mm) | 1.5-2.0 | 1.5-2.0 |
| Nozzle pressure（Mpa） | 0.2-0.5 | 0.2-0.5 |
| Water resistance（96h） | Normal | Normal |
| Acid resistance （48h） | Normal | Normal |
| Alkali resistance（48h） | Normal | Normal |
| Yellowing resistance (168h) | ≤3.0 | ≤3.0 |
| Wash resistance | 2000 times | 2000 times |
| Tarnish resistance /% | ≤15 | ≤15 |
| Mixing ratio for water | 5%-10% | 5%-10% |
| Service life | >10 years | >10 years |
| Storage time | 1 year | 1 year |
| Paint colors | Multi-color | Multi-color |
| Application way | Roller or Spray | Spray |
| Storage | 5-30℃, cool, dry | 5-30℃, cool, dry |
Application Guidelines
Pre-treated substrate
Filler (optional)
Primer
Exterior Emulsion Paint Top Coating
| Application |
|
| Suitable for commercial building, civil building, office, hotel, school, hospital , apartments, villa and other exterior walls surface decoration and the protection. | |
| Package | |
| 20kg/barrel. | |
| Storage | |
| This product stored at above 0 ℃, well ventilation, shady and cool place. |
Application Instruction
Construction Conditions
Choosing the right weather conditions is crucial when painting the exterior of your home. Ideally, you should avoid painting in extreme temperatures, including when it is too cold or hot, as it can affect the quality of the paint job. The best conditions for painting are dry and sunny days with moderate temperatures of around 15℃—25℃.
Application Step
Surface preparation :
Before painting, it is essential to prepare the surface properly. First, clean the surface of any dirt, grime, or loose paint using a pressure washer or by hand scrubbing with soap and water. Then scrape or sand any rough spots or peeling paint to ensure a smooth surface. Fill any cracks, gaps or holes with a suitable filler and allow it to dry. Finally, apply a coat of suitable exterior primer to create an even base for the paint.
Primer :
Primer is critical for any paint job, as it provides a smooth, even surface for the topcoat, improves adhesion, and increases durability. Apply one coat of a good quality exterior primer and allow it to dry completely before applying the topcoat of exterior house washable emulsion paint.
Exterior emulsion paint top coating :
Once the primer is dry, it is time to apply the topcoat of exterior house washable emulsion paint. Using a high-quality paintbrush or roller, apply the paint evenly, starting from the top and working your way down. Take care not to overload the brush or roller to avoid drips or runs. Apply the paint in thin coats, allowing each coat to dry before applying the next. Usually, two coats of exterior emulsion paint are enough, but further coats may be necessary for full coverage and color.
Cautions
1) The opening paint should be used within 2 hours;
2) Maintain 7 days could be used;
3) Film protection: keep away from stepping on, rain, exposing to sunlight and scratching until the film is fully dried and solidified.
Clean up
Clean tools and equipments first with paper towels, then clean the tools with solvent before the paint hardens.
Notes
The above information is given to the best of our knowledge based on laboratory tests and practical experience. However, since we cannot anticipate or control many conditions under which our products may be used, we can only guarantee the quality of the product itself. We reserve the right to alter the given information without prior notice.
Remarks
Practical thickness of the paints can be little different from the theoretical thickness mentioned above due to many elements like environment,application methods,etc.
